FLAT RATE SHIPPING ONLY $12.95*

PC-11® White Paste Epoxy
Cures: Wet, Dry & UNDERWATER

PC-11® White Paste Epoxy Cures: Wet, Dry & UNDERWATER
Item# pc-11-marine-epoxy
Unit Sizes: 
Quantity:
PC-11® White Paste Epoxy  Cures: Wet, Dry & UNDERWATER
Uses: PC-11® has hundreds if not thousands of uses.
As an Epoxy Adhesive: Wood, Metal (all types), Glass, Brick, Block, Rubber, Concrete, Stone, Slate, Fiberglass, tile, and more in any and all combinations. Great for wood boat, metal boat and fiberglass boat repairs or any epoxy repairs in a marine or wet environment. PC-11® marine epoxy will even cure underwater or bond wet materials. Have any swimming pool tiles that have fallen off? Re-attach the tiles with PC-11® marine epoxy without draining the pool!

As an Epoxy Sealant: Oil, Gas, Water Tanks, Cellar Cracks, Pressure Tanks, and Plumbing Leaks.

As a Filler: Holes, Castings, Patterns, Molds, Voids, Welds, and much more.


Description:
PC-11® is a high-tech structural epoxy paste and is formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11® marine epoxy formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High “wet grab” or tack of PC-11® marine epoxy resin makes overhead and sidewall work easy without drip or sag. Great for repairing pool tiles or other equipment without draining the pool. PC-11® demonstrates excellent chemical resistance to mild acids, caustics, chlorine, detergents, gasoline, fuel oil, salt, and fresh water. PC-11® marine epoxy is a high-tech structural epoxy adhesive that cures by a process called polymerization. PC-11® epoxy will bond most everything to anything.
***Note: PC-11® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area if in doubt.

Mixing Tips: In cold or cool temperatures, place PC-11® marine epoxy resin and hardener containers near heat prior to using. PC-11® marine epoxy mixes and spreads easier at 80°F than at 40 F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11®.

Denatured alcohol is excellent for smoothing applied PC-11®. Also use Denatured alcohol to clean surfaces before applying.

***Note: PC-11® marine epoxy is temperature sensitive and will cure faster at higher temperatures and slower at cooler temperatures. You can speed the curing time with application of artificial heat.

Directions:
Using separate knives to remove amount needed, mix equal parts A (white) and B (pale blue) on a flat clean surface until uniform color is achieved. Surfaces to be bonded must be free of dirt, oil, rust, ect. Denatured alcohol can be used to prep the surface. For best results, rough up the surface PC-11® will be bonding to. Normally, no vice or clamp needed. Prop or tape heavy objects to a wall or ceiling.

Applications:
Apply PC-11® epoxy in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample PC-11® remains between the contact surfaces. Use screen wire or fiberglass cloth to reinforce large voids and gaps.

After cure: Paint Drill, Machine, Sand, File, Tap, or Saw.

How to tint PC-11®; Critical Applications, TEST FIRST! Pigments come in three forms: powder, paste, and liquid. Powder pigments are by far the pigment type of choice. Powder pigment is preferred because less is needed to reach desired color. Paste pigments are an option if powders are not available. With paste pigments bold colors may not be achieved. DO NOT exceed more than 5% volume of combined A(white) and B(pale blue). More than 5% will affect the integrity of the chemical properties of PC-11® and is not recommended. Liquid pigments are not recommended (example – food dye). 1. Measure equal amounts of part A (white) and part B (pale blue). 2. Mix the pigment into part A (white) until preferred color is achieved. Exact color matching is difficult and may require assorted pigment colors. 3. Combine part A with part B when the desired color is reached.

Submerged Applications
For underwater, allow mixed PC-11® time to thicken up slightly before attempting to attach underwater. At 70°F wait roughly 15-20 minutes.
*** Please note again: PC-11® is temperature sensitive and will cure faster at higher temperatures and slower at cooler temperatures.



PHYSICAL PROPERTIES
COLOR (component A) WHITE
COLOR (component B) PALE BLUE
COLOR (mixed) OFF WHITE
WORK TIME (70°F) 30-40 MINUTES
TACK FREE CURE TIME 90 MINUTES
CURE FOR SERVICE 8-12 HOURS
MAXIMUM CURE 7 DAY
GARDNERS IMPACT
RESISTANCE
140in./lb
ELONGATION 3%
CONDUCTION (electric) NON CONDUCTIVE
THERMAL SHOCK EXCELLENT
TOXICITY NON TOXIC ONCE CURED
HEAT RANGE _-20 to 200°F
TEST METHODS
TENSILE SHEAR STRENGTH ASTM D 1002 1710 PSI
COMPRESSIVE YIELD ASTM D 695 4685 PSI
FLEXURAL STRENGTH ASTM C 580 2565 PSI
WATER ABORPTION ASTM C 413 0.44%
WEIGHT(specific gravity) ASTM D 792 1.12g/cmł
.648oz/inł
HARDNESS SHORED ASTM D 2240 72 (1wk)
HEAT DEFLECTION ASTM D 648 120°F

Copyright © 2009 Epoxy Warehouse All Rights Reserved.
Store Design by SEOwhat